Home
Published Issues
Author Guide
Editor Guide
Reviewer Guide
Special Issue
journal menu
Aims and Scope
Editorial Board
Indexing Service
Article Processing Charge
Editorial Process
Open Access Policy
Publicatoin Ethics
Contact Us
Copyright and Licensing
Preservation and Repository Policy
General Information
ISSN:
2319-6009 (Online)
Abbreviated title:
Int. J Struct. Civ. Eng. Res.
Editor-in-Chief:
Prof. Eric Strauss
Associate Editor:
Assoc. Prof. Wenxing Zhou
Executive Editor:
Ms. Cherry L. Chen
DOI:
10.18178/ijscer
Abstracting/Indexing:
Google Scholar, Cross-ref, CNKI,
etc.
E-mail questions to:
IJSCER Editorial Office
.
Editor-in-Chief
Prof. Eric Strauss
Michigan State University, USA
I am very excited to serve as the Editor-in-Chief of the International Journal of Structural and Civil Engineering Research
(IJSCER)
and hope that the publication can enrich the readers’ experience...
What's New
2024-08-27
August 27th, 2024 News! Vol. 13, No. 3, 2024 issue has been published online
2024-01-04
IJSCER will adopt Article-by-Article Work Flow. For the quarterly journal, each issue will be released at the end of the issue month.
2023-11-06
November 6th, 2023 News! Vol. 12, No. 4, November 2023 issue has been published online
Home
>
Published Issues
>
2017
>
Volume 6, No. 2, May 2017
>
Heat Loss Reduction Analysis of 2-Layer ETFE Foil by Dymola Simulation
Mohd Azfar Nazim, Sharmin Abdullah, and Mirza Mohammad Maqbule Elahi
Department of Electrical & Computer Engineering, North South University, Dhaka, Bangladesh
Abstract
—ETFE (Ethylene Tetra Fluoro Ethylene) is a light weight foil with architectural beauty which is commonly used as building material. However to improve the poor heat insulation, deposition of multiple layers of low-emissive coating is necessary. During winter large amount of heat can be trapped since the property of low-e coating includes reduction of radiative part of heat loss with the increase in infrared reflection and decrease in infrared emission. Thus the reflective property stops emission of radiant heat outside, keeping the produced radiant heat inside. The simulation of 2 layer ETFE pillows is performed using Dymola Simulation software with and without low-e coating. The simulation showed a significant reduction in U value from 2.6 to 1.7.
Index Terms
—ETFE, DYMOLA, LOW-E
Cite: Mohd Azfar Nazim, Sharmin Abdullah, and Mirza Mohammad Maqbule Elahi, "Heat Loss Reduction Analysis of 2-Layer ETFE Foil by Dymola Simulation," International Journal of Structural and Civil Engineering Research, Vol. 6, No. 2, pp. 112-115, May 2017. doi: 10.18178/ijscer.6.2.112-115
7-L0010
PREVIOUS PAPER
Influence of Texture Depth and Layer Thickness of Crater-like Textured ZnO on the Efficiency of Thin Film Solar Cell
NEXT PAPER
Influence of Site Conditions on Seismic Design Spectra for Bridges