Abstract—Waste fibres coming from the recycling process of the old tires were incorporated in slurry infiltrated fibre concrete (SIFCON), which is a special type of high performance fibre reinforced concrete with high fibre content. The technological feasibility (i.e. suitability of the waste fibres for SIFCON technology) was assessed using infiltration test and homogeneity test. Test specimens were prepared with three volume fractions (5; 7,5 and 10 vol. %) of waste unclassified fibres. SIFCON with industrial steel fibres (10 Vol. %) and high performance fibre concrete with industrial fibres were also cast and tested for comparison purposes. Quasi-static mechanical properties were determined. The impact test was carried out by using an in-house manufactured impact testing machine based on drop test principle. Realized tests confirmed the possibility of using the waste fibres for SIFCON technology. The obtained results indicate, that the usage of waste fibres does not significantly reduce the values of SIFCON flexural and compressive strength at quasi-static load and energy absorption at dynamic load, the values were comparable to the specimens with industrially produced fibres.